What is the facing artificial stone Decorative artificial stone is made from a
mixture of different building materials. Its composition can easily include polymerbetones, cement, and different resins, as well as other binding elements. Often, to make artificial stone more durable, specialists add polymers to the composition, which make the material noticeably stronger.
One of the rules related to artificial stone states: choosing the material for the lining of the facade, carefully look so that its composition does not contain materials, environmentally unsafety.$ Otherwise, living in a house will simply be impossible.
Artificial stone is made quite simple. All materials that should be part of it are usually presented as powders. These powders are mixed in certain proportions and poured into the mold. There, finished tiles or bars remain until completely drying. As a result, it turns out a slab, which on one side is flat, and on the other has an unusual surface – the same as that of natural stone. It is on the shape depends both the size and thickness of the plate – it can be from 0.5 to 5 square meters thick 1-2 cm. In the event that originally intended to create a cobblestone imitation, the thickness of the product will be equal to 10 cm.
The scope of application of artificial stone
plus a material such as artificial stone is that its scope is quite wide and knows no boundaries. Architects are very gentle about such cladding material, as it allows them not to limit themselves in anything. First, it is due to the number of varieties of material on the market – there are many today for every taste and color and at any price.
Most often artificial stone is used for facing facades, roofs, plinths, various columns, garden buildings and fences. Also artificial stone is used for finishing loggias, various inserts, belts and other architectural elements. Basically, one can use the way fantasy allows. There
are no specific requirements for which zone to use a particular type of stone. True, there is still some advice. For example, those samples that imitate cobblestone are used to finish the plinth, and those stones that have a more even surface are used to finish architectural details.
Plus the facings are artificial stone in that it is perfectly combined with any other kind of materials – both with wooden surfaces, with plaster, and with brickwork, etc. artificial stone looks good in the neighborhood to wrought iron elements, balconies, stucco etc. Very often artificial stone is used to ennozzle the old room
Properties artificial stone
Decorative stone is considered more aesthetic, as it can have absolutely any coloration, even one in which natural stone is not found. In addition, artificial material does not have any radioactive background and therefore is considered as environmentally safe as possible.
Another problem faced by people working with artificial stone is its smooth shape. It turns out that there is no special need to drink and align it to a perfect state. And artificial stone weighs an order of magnitude less than natural. As a result, it can be placed without special fear on the walls of the house, without worrying that everything will fall under the weight of its own gravity. And artificial stone gives good noise insulation.
Choosing artificial stone, you must be sure to follow the rules, otherwise the material will not become an assistant for you. It is best if the surface contains many different semitones – this will significantly improve the appearance of the material.
Remember that in nature, single-tone stones are rare, so try to choose the material that has small differences in shades.
It is best to choose the materials of the domestic manufacturer. This is due to the fact that abroad stone is produced mainly under their conditions – and there winters are warmer, precipitation is more. The domestic manufacturer makes stone according to its internal standards.
It is important to examine the stone carefully. The ideal option is one that contains particles not more than 5 mm, but it is better that they are not at all. Check the presence of burnacles on the stone’s spool. If the constituents are properly separated, there must be a filler in the rear, and a strong layer in the front, creating strong protection.
Buying artificial stone, it is worth asking if the processing of the material has been done. If not, necessarily need to make it yourself. It is also desirable to repeat it at least once a year. To perform the treatment procedure, it is enough to wipe the stone with a damp rag, then apply a primer on the concrete. Such composition is sold in construction stores and is relatively inexpensive.